SOURCE Power supply AC / DC 40.8W, 1.7a for DIN rail mounting
Switched power supply
Format to ride on DIN rail.
Universal entry range 85-264vca 47-63hz.
Output voltage 24vcc. (Adjustable with potentiometer 27,6-32,4vcc).
Output intensity: 1,7To Output current range 0-17a as the load demands.
Regulation from 10% to 100% of the output intensity with a regulator 1-10v, 10V PWM signal with a frequency of 100Hz at 3khz or resistance from 0 to 100k ohms. With the regulation we can not turn off the exit, we can only go down to 10%.
Power: 40.8W.
Efficiency: 88%.
Consumption without load
Insulation Entrance-output 3000vca.
Cuddling 150mvp-page.
Working temperature: -20 until +70C. of room temperature. See the technical sheet to see drift curves.
Dimensions (wide x high x background): 40 x 90 x 100mm.
3 years warranty.
Certificates: CE
The MDR source series has a rectangular format and narrow size for installation in DIN TS-35 / 7.5 or 15 rail.
All models have correct output voltage indication (DC-OK), by signal (MDR-10/20) or relay (MDR-40/60/100). Also, all models have LED indicator for Power ON.
es
gb
pt
it
fr
